include <BOSL2/std.scad>
include <BOSL2/screws.scad>
$fn = 90;



module New_mount_top() {
    difference(){
   union(){
        translate([-20,8.5,-0.2])
    cube([40,35.5,6]);
            translate([0,33,0])
cuboid([5,20,10], anchor=CENTER, rounding=1);
   }
//fixhole
 
    rotate([0,90,0])
    translate([-2.8,29.8,-0.1])
 cylinder(d=3.1, h= 40.5, center=true);    
   
//topholes        
        
    rotate([0,0,0])
    translate([-11.8,37.5,-0.1])
 cylinder(d=3.3, h= 40.5, center=true);    

    rotate([0,0,0])
    translate([-11.8,22.5,-0.1])
 cylinder(d=3.3, h= 40.5, center=true);    

    rotate([0,0,0])
    translate([11.8,37.5,-0.1])
 cylinder(d=3.3, h= 40.5, center=true);    

    rotate([0,0,0])
    translate([11.8,22.5,-0.1])
 cylinder(d=3.3, h= 40.5, center=true);    
      
       
        }

difference(){
union(){
translate([-20,3,-0.2])
        cube([40,5.5,6]);
    
    rotate([0,90,0])
    translate([-2.8,3,0])
 cylinder(d=6, h= 40, center=true);   
    }
translate([-15.3,0,-1.2])
        cube([10.6,8,7.2]);

translate([4.7,0,-1.2])
        cube([10.6,8,7.2]);

    rotate([0,90,0])
    translate([-2.8,3,-0.1])
 cylinder(d=3.1, h= 40.5, center=true);   
    

      

}


}

module New_mount_bottom() {
    difference(){
    translate([-20,9,-0.2])
    cube([40,39,6]);
        //suction hole
    translate([0,48,0])
     cylinder(d=12, h= 38, center=true);    
  //mount holes
          translate([12.5,26.5,0])
     cylinder(d=5.1, h= 38, center=true); 
   
           translate([-12.5,26.5,0])
     cylinder(d=5.2, h= 38, center=true);        
    }
    


difference(){
union(){
translate([-20,3,-0.2])
        cube([40,8,6]);
    
    rotate([0,90,0])
    translate([-2.8,3,0])
 cylinder(d=6, h= 40, center=true);   
    }
translate([-20.1,0,-1.2])
        cube([5.1,9,7.2]);

translate([-5,0,-1.2])
        cube([10,9,7.2]);

translate([15,0,-1.2])
        cube([5.1,9,7.2]);


    rotate([0,90,0])
    translate([-2.8,3,-0.1])
 cylinder(d=3.1, h= 40.5, center=true);   

}

difference(){
translate([-26.5,9,-0.2])
cube([6.5,40,6]);
translate([-44,53.3,0]) 
cylinder(d=50, h= 15, center=true); 
translate([-45,7.8,0]) 
cylinder(d=50, h= 15, center=true);     

}

difference(){
translate([20,9,-0.2])
cube([6.5,39,6]);
translate([45,52.3,0]) 
cylinder(d=50, h= 15, center=true); 
translate([45,7.8,0]) 
cylinder(d=50, h= 15, center=true);   


}
//cirkel translate
difference(){
union(){
difference(){
    rotate([0,90,0])
    translate([-2.8,3,-23.5])

 cylinder(d=65, h= 6, center=true);   
//slot
    rotate([0,90,0])
    translate([-2.8,3,-23.6])
 cylinder(d=57.5, h= 7, center=true);   

}
difference(){
//center
    rotate([0,90,0])
    translate([-2.8,3,-23.5])
 cylinder(d=50.5, h= 6, center=true);   

//hole
    rotate([0,90,0])
    translate([-2.8,3,-23.6])
 cylinder(d=43, h= 7, center=true);   

}


}
    translate([-27,-21,-30.2])
cube ([10,60,30]);

    translate([-27,-47,23.2])
rotate([-60,0,0])
cube ([10,50,30]);
}
//close off the circles
difference(){
    translate([-26.5,-16.82,28.55])
rotate([-57,0,0])
cube ([53,11,5]);

//cutout the closing bar
    translate([-20.5,-17.82,28.50])
rotate([-57,0,0])
cube ([41,12,6]);    
}

//2nd
//cirkel translate
difference(){
union(){
difference(){
    rotate([0,90,0])
    translate([-2.8,3,23.5])

 cylinder(d=65, h= 6, center=true);   
//slot
    rotate([0,90,0])
    translate([-2.8,3,23.6])
 cylinder(d=57.5, h= 7, center=true);   

}
difference(){
//center
    rotate([0,90,0])
    translate([-2.8,3,23.5])
 cylinder(d=50.5, h= 6, center=true);   

//hole
    rotate([0,90,0])
    translate([-2.8,3,23.6])
 cylinder(d=43, h= 7, center=true);   

}


}
    translate([18,-21,-30.2])
cube ([10,60,30]);

    translate([18,-47,23.2])
rotate([-60,0,0])
cube ([10,50,30]);
}
//    translate([20.5,-16.5,28.8])
//rotate([-57,0,0])
//cube ([6,11,5]);

}






color("coral")
New_mount_top();
color("coral")
rotate([270,0,0])
translate([0,-6,0])
New_mount_bottom();